Updated January 2007
We've had a lot of questions about accessing class and web files from off campus. We provide two methods for this: FTP and Remote Desktop. Remote Desktop is the preferred method and lets you do all sorts of useful stuff that FTP can't; most of the FAQ will be devoted to that, once we get a few FTP questions out of the way.
FTP stands for File Transfer Protocol, and is a way of uploading and downloading file between a local computer and a server somewhere else. If you have a computer somewhere off campus, you can use FTP to get at your files on the campus network. To get started, go to " http://www.wou.edu/sshclient; whether you have a Mac or a PC, you will find instructions and free program downloads here. (If you have a Linux box, you presumably know how to set up an SFTP connection on your own, though you'll still find information you'll need on that page.) The rest of the FTP questions assume that you're familiar with these instructions.
If your class has a folder set up in the K: drive, connect to the FTP server. Change the remote site location to "class:" (don't forget the colon) and navigate to the appropriate folder just as you would through the K: drive on campus. This will only work if your class folder has been set up this term; if you are a professor and you need a new folder set up or an old one updated, contact Troy Knabe at email@example.com.
For a personal website accessible by an URL such as http://www.wou.edu/~username, set the remote site to public_html:. For pages that are part of the WOU website, set the location to web: (again, don't forget the colon) and navigate just like the X: drive on campus.
The nutshell version is that Remote Desktop allows you to connect to a Windows server from another computer, if you have been granted access. If that other computer is also a Windows XP machine, you don't need to install any software; older versions of Windows do require an install, so you should contact Joe at firstname.lastname@example.org for help if you have a pre-XP version of Windows. He can also help you get Remote Desktop set up on MacOS X machines.
If you have exclusinve access to a computer on campus, you can use Remote desktop to connect to it from off campus. This will let you do anything that you could do if you were sitting at that computer, including running programs and accessing the network drives. As of mid-2006, you don't even need a computer of your own on campus; you can access the terminal server and it will be just as though you were sitting on one of the thin client labs.
In order to save money and management time, we have been installing "thin clients" in several labs and other locations across campus. These machines are much simpler and cheaper than full-scale computers, because they don't have any local storage, or a very powerful processor; they just act as a terminal for a more powerful machine (called a terminal server) that does the real work. One terminal server can support many thin clients, and also handle Remote Desktop connections.
Previously, Remote Desktop required you to have exclusive access to a computer on campus, such as in an office. Now you can connect to the terminal server instead; this gives you access to your network storage just as if you were sitting at a computer on campus. Also, whether on or off campus, the terminal server gives you access to the latest versions of several programs that you may not have, such as StarOffice, Microsoft Office, and Macromedia Dreamweaver or Contribute, among others. Also, Remote desktop is far easier to set up if you just want to connect to the terminal server instead of a personal computer.
First, you need a computer on campus to connect to. If you plan to connect to the terminal server, it is already set up for you; you can skip to the next question. If you are not using the terminal server, you need administrative rights on the on-campus computer you want to access. You can test this by changing the time on that computer's clock, and if you don't get an error, you have admin rights. If you do get a security error, contact the Service Request Desk at 88925 or email@example.com and let them know so they can send a tech out to fix it. (If you're a student, they'll need confirmation from a faculty or staff member.)
Once you have verified that you have admin rights, right-click on your "My Computer" item in the start menu, and choose "properties". In the System Properties dialog box that pops up, go to the Remote tab. Check the box to "Allow users to connect remotely to this computer". Click the "Select Remote Users" button just below that and verify that the list is empty; just below the list it should say "MASH\(your username) already has access". This is important as it verifies that no other user but you can remotely connect to this computer.
You'll also need to know the computer's IP address. If you don't know how to find it, open a web browser on that computer and go to " http://www.whatismyip.com. Note down the address; you'll need it to connect with this computer. When you leave campus, instead of shutting down that computer, just use the "Log Off" command in the start menu instead. Be sure to leave the power on. If these instructions don't make sense to you, call the UCS Service Request Desk at 88925 and ask for help setting up a computer to allow a Remote Desktop connection; you can also connect to the terminal server without needing to do any of this setup process.
From home, go to All Programs in your start menu, then to Accessories, and look for "Remote Desktop Connection". It also might be in the Communications submenu under Accessories. If you don't see it in either place, or you are on a Mac, contact the Service Request Desk for help getting a Remote Desktop client downloaded and installed. If you do see it, click it; this will pop up a small dialog box. Enter the IP Address that you noted for the campus computer; to connect to the terminal server, enter "ts.wou.edu" instead. Click the Options button at the lower right to expand the dialog box; enter your username, password, and domain (MASH) in the appropriate fields. This is the same username and password you use to log on to computers on campus. Click the "Local Resources" tab and click the "Disk drives" checkbox near the bottom. This will ensure that when you are remotely connected to the other computer from home, you will be able to copy files back and forth between the work and home drives. Note that newer versions of the Remote Desktop software might not give you these options until after you click Connect, so don't panic if you can't find them at first.
Once you have those settings entered, click the Connect button at the bottom of the dialog box. You may see a security warning about connecting local disk drives; this is normal, and you can click through it. If all goes well, you should see the screen turn dark blue, and show a small, light-colored, beveled-edged, control bar at the top. You should see a login box; if you filled in your password correctly before, it should go right through, and if you didn't, you can always enter it here. After that you will see the desktop of the on-campus computer, and you can do anything just as though you were sitting at that computer.
If you have everything set up right on the remote computer, and you are sure you wrote down the correct IP address, you need to check and see if you have any firewall software or network hardware between your home computer and the Internet. If you do, you need to configure it to allow port 3389 to pass through. If you don't know how to do this, consult your user manual or contact tech support for the firewall or router or whatever it is; there are too many brands out there for UCS to be able to support, though we may be able to give you general hints. If that doesn't help, recheck the remote computer's IP address next time you are on campus; these addresses change every term or so. If you still can't connect, contact the Service Request Desk.
That control bar lets you do what a normal window's title bar would let you do; you can minimize, maximize, or resize your Remote Desktop session just like any other window on your machine. The buttons that control those functions are on the right, as with normal windows. On the left is a little push-pin icon; if you click it, it turns the auto-hide mode on for the control bar. Move away from the bar after that, and it will retract up into the top of the screen. To get it back, just move your mouse pointer up to the top of the screen, anywhere near the middle of the edge, and the control bar will reappear. If you'd rather it not vanish like that, click the icon again to pin the bar in the visible position.
Assuming you clicked that "Local Resources - Disk drives" checkbox I mentioned earlier, you should see both your local and remote drives in the remote session. Open the My Computer window within the remote session; below the drives you are used to seeing when you are on campus, you should also see all the drives in your local computer, including USB drives, CD drives, etc. If you open one of them, you can drag files from it to the drives on the remote computer, and vice versa. You can do a lot more with this than edit web pages, of course; you can use any program on your work machine, and retrieve or upload any document.
They'll just see a message that says "This computer is in use and has been locked." They can't see what you are doing.
Save whatever you are doing and then let it restart. You will lose your connection while the campus computer reboots, but once that is done, you can just try connecting again. If you try too soon, you'll just get an error; wait another minute or so and then try again, and it should let you connect.
Within the remote session, look at the Start Menu; find the Logout button and click it. The Disconnect button also works, but Logout is recommended, especially if you are on the terminal server.
University Computing Services 503-838-8154 | or e-mail: firstname.lastname@example.org
Open the original version of this page.