That’s a question we hear a lot from new students. If your high school art programs didn’t offer printmaking, you may not have had the opportunity to learn about it until now. Don’t let that stop you from exploring the wide range of printmaking techniques offered at WOU. Printmaking is closely related to drawing and painting, yet printmaking is unique because it allows artists to create multiple originals from an inked matrix (block, plate, or screen). Each hand pulled print is original art, just like a drawing or painting. (see Course Offerings)
Printmaking is typically divided into four basic categories: screen printing (pressing ink through stencils attached to a fabric screen); relief printing (inking the raised surface of a carved block of linoleum or wood); intaglio printing (printing from the recessed surfaces of an etched or engraved plate using a high-pressure printing press); and lithography (printing an image from a smooth piece of limestone, aluminum or polyester that has been sponged with water while being rolled up with oil-based ink).
Printmaking as an artform has been around since prehistoric cave dwellers in Lascaux, France first used their hand as a stencil while they blew paint onto the cave walls. Since then, developments in China (invention of paper and block printing) and Europe (copper etching, stone lithography) have expanded the expressive potential of printmaking as an art form.
Here are examples of original, fine art prints made by some famous artists you may have heard of:
(Four small thumbnails of prints by master printmakers) click on thumbnails to see enlarged images, along with artist's name, medium, and title.
Our Introduction to Printmaking course lets you sample a range of printmaking techniques: linoleum relief, colored monotypes, screen printing, and drypoint intaglio. You’ll also learn how to sign and mat original prints.
A370s and 470s
Intermediate and advanced printmaking students spend a whole term exploring a single category of printmaking: screen printing, relief printmaking, intaglio printmaking or monoprints (emphasizing non-toxic lithography). Within each of these broad categories, students will explore at least three different techniques per term.
(see examples of student prints)
Posters (offset lithographs), on the other hand, are commercial reproductions of artwork (usually paintings or drawings) that have been scanned and printed in the same way that magazines and newspapers are printed. So, those Thomas Kinkade "limited edition offset lithographs" that you see at the mall are NOT hand-pulled original prints, but merely overpriced posters printed on good quality paper. We don't teach that kind of printing here.
Innovations in Printmaking
Although printmaking has been around for thousands of years, until very recently it has been a hazardous pursuit. Exciting developments have surfaced recently that have made printmaking safer, more economical, and environmentally friendly without compromising the rich and expressive quality of the printed image itself.
Here are some of the innovative practices WOU has adopted in our non-toxic printmaking studio:Edinburgh Etch:
This method uses ferric chloride, a corrosive salt, in place of nitric acid to etch copper or zinc plates. Ferric chloride releases no poisonous fumes or hydrogen gas, is non-combustible, and will not damage internal organs or the central nervous system like nitric acid can. Ferric chloride is mixed with citric acid to speed up the etching process and keep the metal particles in suspension so that they won’t settle to the bottom of the etched lines as they would if submerged in plain ferric chloride solution. The diluted solution will not harm the septic system or ground water quality.
DuPont developed this polymer film for the electronic circuitry industry. Printmakers have adopted the film for use in intaglio printmaking. The film is adhered to a printing plate with water, exposed to UV light through a film positive, and developed with common water softener. The plate is cured in sunlight and then inked and printed in the regular intaglio manner. The plate is reusable: simply remove the film from the plate with a strong solution of water softener or diluted ammonia.
Solar plates are photo sensitive, steel-backed plates that can imaged by exposing the plate to UV light through a drawn transparency. After the plate is developed in plain tap water, it can be printed in either the relief or intaglio method of printmaking. Depending on the materials used to make the initial image on the transparency, solar plate prints may look like lithographs, etchings, ink washes, or woodcuts.
Polyester Plate Lithography:
This form of lithography is non-toxic, unlike traditional stone lithography. Plates are lightweight, durable, and inexpensive. Polyester plates eliminate the need for rare and costly limestone printing blocks. They may be drawn on by hand or run through a copier or laser printer. Plates no longer require a nitric acid etch, petroleum-based Lithotine solvent, asphaltum, or lung-threatening rosin and talc. These plates may be printed on a small intaglio press, making them more practical for the home studio. (Traditional lithography presses weigh about 2,400 pounds and are four times as expensive as intaglio presses.)Vertical etching tanks: Unlike a traditional flat etching tray, which takes up most of the counter and permits the etchant to evaporate quickly, the vertical tank has a small footprint and has a lid that keeps in fumes and minimizes evaporation. The vertical tank can also hold more copper plates in the etchant at one time.
Acrylic Aquatint Solutions:
This liquid replaces the potentially explosive rosin particles used in the traditional aquatint method. A non-toxic, acrylic-based liquid is sprayed on the plate with an airbrush in a vented booth. This acrylic spray is acid resistant, yet may be removed from the plate with soda ash or diluted ammonia.
A Healthier, Eco-friendly Printmaking Program
We've reduced hazards without compromising the breadth or richness of our students' experience in printmaking. Here are some of the health conscious changes we've made:
- Replaced oil-based intaglio ink with soy-based inks that can be cleaned up with soapy water.
- Use vegetable oil and citrus-based cleaners for cleaning up oil-based printing inks (instead of petroleum-based solvents).
- Replaced nitric acid with safer ferric chloride (a salt) for intaglio class.
- Eliminated the potentially explosive aquatint rosin used for intaglio class and replaced it with a ventilated acrylic aquatint airbrush station.
- Use wallpaper paste as our screenprint ink medium, and choose diazo-salt sensitizers (instead of hazardous ammonium bichromate) for our photo emulsions.
The studio is well equipped with high-quality presses and printmaking equipment.
(see our studio)
A large Two Wheelan™presses and one custom intaglio press built by John Poole are used to print relief blocks, polyester plate lithographs, intaglio plates and monotypes.
A Charles Brand™ press is available for printing lithographs.
An Olite™ Vacuum Exposure Unit is used for transferring computer-generated, hand-drawn, or photographic images onto serigraphy screens and intaglio plates.
Flat files and cabinets are available for student storage. A large drying rack and a stack of pressing boards provide a lot of space for drying prints.
Our tabletop plate shear cuts small copper plates. A full-sized plate shear is located in a nearby studio. Light tables and mat cutters are also available for student use.
We have high-quality rollers and brayers of all sizes. Professional grade tools are loaned to students in the intro level courses to help minimize out-of-pocket expenses. Blotter, inks, and many miscellaneous supplies are provided through student fees.
A ventilated aquatint spray booth maintains a safe environment and doubles as a darkroom booth for preparing light sensitive screens and plates.
About the Professor
Professor Rebecca McCannell
Rebecca McCannell earned a B.F.A. in Drawing and Printmaking from Aquinas College, Grand Rapids, Michigan. She completed a M.F.A. in Drawing and Printmaking at Northern Illinois University, DeKalb, Illinois. She has been teaching printmaking and drawing at WOU since 1995.
Rebecca is an avid proponent of non-toxic printmaking. In addition to her university course work, she has taught summer printmaking workshops on the Oregon Coast at Sitka Center for Art and Ecology and has taught drawing to high school artists at Oregon State University's JumpstART program for several summers.
Rebecca is an artist member of Print Arts Northwest and the Los Angeles Printmaking Society. She has exhibited prints throughout the U.S.A, as well as in China, Japan, England, Scotland, Australia and New Zealand.
Examples of recent work
Art Department 503-838-8000 | or e-mail: firstname.lastname@example.org
Open the original version of this page.